LED display according to the application field is different, is divided into a variety of installation methods, there are: fixed installation, leasing, installation, field fence.
LED display screen according to the user the use of a different environment, for a variety of installation: wall hanging type, cantilever, mosaic, column type, standing, roof type, mobile type, the stadium fence type, leasing hoisting, arc form and so on many kinds of installation.
More common 6 kinds of LED display installation way
1, wall mounted installation
1) the install method is usually used for indoor or outdoor half
2) screen display area is small, generally do not leave maintenance space, the entire screen to take down for maintenance, or make a folding frame
3) the area of the screen is slightly larger, generally used in front of the maintenance design (that is, the front maintenance design, usually by column assembly method)
2, column type installation
There are a variety of vertical column installation, the general use of outdoor advertising, the following:
1) Dan Lizhu installation: applicable to Xiaoping application
2) double column installation: applicable to large applications
3) closed maintenance channel: suitable for simple box
4) open maintenance channel: suitable for standard box
3, cantilever installation
1) this way for indoor and semi outdoor
2) is generally used in the corridor, the corridor at the entrance, also has the station, the railway station, the subway entrance and so on.
3) is used for traffic guidance on roads, railways and highways.
4) screen design is generally used in one cabinet design, or lifting structure design
4, hanging type installation
This installation and cantilever installation similar, applications are the same, screen body adopts the integrated cabinet design scheme for indoor and semi outdoor screen
5, mosaic installation
1) the whole display panel is embedded in the wall, and the display plane and the wall surface are in the same horizontal plane.
2) using simple box design
(3) the general use of pre maintenance (positive maintenance design)
4) this installation method, Touchi, outdoor use, but the general application and a small distance and display area of the screen is not large
5) is generally used in the building entrance, building lobby, etc.
6, vertical installation mode
1) generally use the integrated cabinet design, also FenLieShi combination design
2) suitable for indoor small dot screen specifications
3) general display area is small
4) the main typical application of TV LED design
7, roof mounted
1) this is the key to the installation of wind resistance
2) generally with a tilt angle of the installation, or modules using 8 degree design
3) used for outdoor advertising display
8, the football field fence installation
Used for the football field around a ring fence advertising display
The angle of the screen can be adjusted with the angle of the support frame.
Using soft silicone mask design, and the use of soft arc top design, so as to avoid sports injuries
9, leasing and hoisting method
Screen size determined by ordinary screen.
Lifting screen should not be bigger. General requirements in the following 6M*10M. Special case material and the exception of the curtain type.
Top with hanging beam, bottom of the bottom with the bottom of the beam. Suspended beam for lifting screen.
Line and line box, connected with the hoisting mechanism is arranged between the lock box, the level of tension.
Lifting mechanism is divided into: gear type, cone rod type, bolt type.
Gear type is more expensive, beautiful,
Cone rod type affordable, reliable.
The screw type is the most inexpensive and reliable, and the assembly is troublesome, and is suitable for the case that is not repeatedly disassembled and assembled.
10, arc form installation method
Frame length x width (height): LxW
Frame length W: refers to the height of the picture.
Frame length L: the length of the picture.
Screen length can be determined by the circle or arc of Zhou Changlai. And then divided by the length of the module to determine the number of modules.
For circular screen as far as possible by 92 modules to be divided; as far as possible, 3, 4, 5, 6, 2 of the integer number to determine the number of lines of a number of modules (easy to divide the box, easy to produce). The draft general module is 2 degrees, a module of only 4 degrees. That is, 92 modules are generally required to form a perfect circular screen. Not less than 60 modules.
Determine the number of the number of lines, you can draw the length of the picture.
Screen length L = number of modules * module length
Picture area A = L*W
For the non circular screen (Hu Xingping), just need to be divided, like cutting the cake like.
The mounting frame needs to be customized according to the size of the circular screen (arc screen).
11, truss mobile installation
1) according to the actual needs of the screen can be moving in real time
2) screen body movement according to the display screen and the scene situation to carry on the division to move
3) the design of truss Guide
4) is generally used in the stage of the background of the screen, and more for television, concert, etc.
No comments:
Post a Comment